Radius
When do the ratings come out
If you are a monthly subscriber, Ratings come out on the 28th of each month. Unless the 28th lands on a weekend or Holiday. In that case the woud be released generally on the next closest business day. NOTE: Each book is the previous month of Data. ...
Running Radius on Apple MAC
To run Radius on a Mac you will need to install a Windows virtual enviroment. The are various versions available online but the only one authorized by Microsoft is Parrellels. You can learn more about it at https://www.parallels.com/
Duplication,Shared Audience, Exclusive Cume Reports
We do not track duplication or exclusive listeners in Ranker, Trender or Profiler reports. You can get a gist of duplication by putting a schedule together for more than one station. In the totals area it will show you the Reach and cume for each ...
How to copy Schedule lines to Description Lines Automatically for XMLs
Here is a quick video showing you how you can automatically copy the schedule lines to the Description lines in an XML. It will leave the desciption lines they way you have them and only change them inside the XML for the Agency. <br>
Selling using Cost Per Impression (CPI)
Cost Per Impression (CPI) is a stat now available when creating Schedules. it breaks down the cost to the lowest form: what is the cost everytime a person hears your commercial. The cost is often time a penny or two and some times less than a penny. ...
How to add dates to a Multiweek Schedule or Flighting
There is a simple way to add dates to a one flight multiweek schedule or a multi flight schedule. Create the schedule as you always do but to add the number of weeks click on the SETUP tab to the left of the flighting tabs in the bottom left corner: ...
How to import an XML schedule
Here is a video showing you how to import an XML of a schedule that a co-worker wanted to share with you. Note: If you want to create a schedule you want to share with a co-worker CLICK HERE
How to add and Remove Stats on the Schedule Report you send out.
On your worksheet you have lots of stats available to you. However when you create a report you want to take to a client you may not want to include all those stats. You can pick which stats to display on your Report and this quick video will show ...
Stats do not fit on the Report
If you are including a lot of stats on your schedule report they may run off the page. There are a couple of things you can do to make them fit. 1) If you have stats you do not want to include here is a video on how to remove them from the report; 2) ...
How to run a Qualitative in Ranker, Trender, Profiler and Scheduler
If you want to run a qualitative Ranker, Trender, Profiler or Scheduler, see how below. We ask 4 qualitative questions: Income Level, Education level, Children in the Household, and Household size. We do not track buying habits. To run a qualitative ...
Results on Ranker or Trender not displaying correctly. Only one stat box per page.
When running a mulit daypart, demographic report does your report nly show one results box a page rather than two or three? Or maybe it seems to justify everything to the far right or left. This can because by having to large of a company logo you ...
How to create a schedule when the weeks change in a flight or you want to consolidate the number of flights.
What to do if you, have a multi flight you want to condense or a flight where the schedule changes week to week inside that flight? Here are some workarounds. Keep in mind these will not work when creating an XML for an Agency as they require dates. ...
How to use the Eastlan Knowledge Base powered by AI
Here is a quick video on how to use our Knowledge base.
Create a Graph for your reports in Ranker and Trender
If you want to include a graph of your Ranker or Trender results for a report, this video will show you how.
How only show the top 10 stations in a Ranker or Trender ( or any other number you want)
There are times when you do not want to show all the stations in the market for a Ranker or Trender. You have the option to show the top number you want: 5, 10, 15 and so on. Here is a screen shot showing you where the function is. And a video to ...
How to bold the stations in a Ranker and Trender
This video will show you how to make the stations you want be bold font in Ranker and Trender. This will make them bold on you results page and the reports you generate. Quick explanation: When on the results page just click on the stations you want ...
Number of weeks not showing in Totals in Scheduler
If you are trying to create multi week schedule and all that shows up in the totals is a row showing 52 weeks and not the number of weeks for you schedule. Here is a quick video showing you how to fix that.
Using the Zip and County Feature in Radius
If you want to see how your station is performing in various Zip codes or Counties the video below will walk you through it. Because we are slicing the data pretty thin by Zip Codes you can only see 12+ Monday-Sunday 6a to Midnight.
How to copy schedules to different flights
Do you want to copy one flight schedule to another flight? It is easy to do. First click on the flight you want to copy. In this example we are copying flight one to flight two. So click on flight one to highlight it. Then Right Click the flight. and ...
How to make the Y appear in totals next to the Radio Station name when the schedule for the station is blue
If you are not seeing the totals for a station in the totals area or the number of total weeks is not showing in totals here is a possible solution. You will find this is often the issue if you completed a schedule but nothing shows for that radio ...
Toggle weeks on and off inside a single flight
There is not a way in Radius to toggle weeks on and off within a single flight. However there is a possible workaround if you do not need to send an XML. Click on link below. NOTE: If sending an XML to an Agency their software requires dates be ...
Change what month or Demographic that a schedule is based on
If you have an existing schedule that you want change what month (book) it based on, it is easy to change. Maybe you have a schedule you want to change the demographic it is based on. You do not have to re-create the schedule. You can simply change ...
Cume or schedule reach not showing anything - Rounding Numbers
If in scheduler, Ranker, or Trender it is not showing you anything for Reach or Cume, odds are you either have not put a rate in for scheduler or the cume for that daypart of that station is very low. One way to see if there is some Cume or Reach is ...
PDF from Report is showing symbols and not letters and numbers
If when you open your saved PDF report from Radius and it is showing symbols instead of letters and numbers the video below will walk you through what is going wrong and a work around. The issue is not with Radius but insteasd your reader not being ...
Ways to use the ALL TAB in scheduler
Using the all tab is a easy way to see what your full schedule is in one tab. Also easy way to make adjustments without having to go from tab to tab, especially in flighting. This video will show you how to use the ALL TAB.
How to remove a station or flight from XML but keep on Schedule
This video will show you how to remove a flight or station from an XML that you want to send to an agency but still keep them on your schedule.
How to remove a radio station from Reporting but leave it on your schedule
There may be times where you created a mulit station schedule for a client, but they decided to only run on one station. Or they want a report for each station individually. But you do not want to rebuild the schedule or you want to keep it for ...
Add a logo to reports and inside Radius
There are two ways to add your station or company logo to the Radius Reports 1) If you want to add the logo and design the other elements of the reports download the attached instructions for Designing the Reports. 2) If you just want to add a logo ...
Install the Radius Software
Here is how to instal the Radius Software. Go to where you downloaded the software file or where it is located on your Company network. Double click on the file to start the download process. You will want to click on all the next, accept and finish ...
Cannot see totals for all Flights in a Schedule
If you can not see the totals for all of your flights in Schedule but instead on see one flight, there are two usuall causes. 1) you do not have Link Folders in Flighting setup checked. Click the SETUP tab located to the left of the flighting tabs ...
Run a Ranker or Trender and see hour by hour dayparts
If you want to run a Ranker or Trender and see hour by hour, here is how you do it: When running a ranker using the wizard and reach the DAYPART SELECTION screen. Click on the HOUR x HOUR tab. You now can select the hours you want.
How to delete or insert a daypart line in a schedule
When building your schedule you may want to delete a daypart entery or instert a line betwee a couple dayparts you already entered. Here is how to do it: LEFT click on the grey box next to the line you want to erase ( see red box below). This will ...
How to Switch Data Ratings Months in Scheduler
If you have an existing schedule you would like to change what month(s) the schedue is based on, the instructions are below. Example you build a schedule based on July 2024 numbers and you want the schedule to now be based on July of the present ...
Run Time Error
You may get a run time error if there is a conflict in Scheduler where the software cannot complete what you are trying to do. Or there is a software issue. Solutions Close the software down. Reopen and see if the issue is fixed. Reboot your computer ...
Duplicate Station Error in Scheduler
This error occurs if you have the same station showing in schedule worksheet twice: You cannot have a station listed twice. Use show the station only once and if something in the schedule changes for that station just enter the schedule on a ...
Export to Excel in Ranker, Trender and Profiler
If you want to export your Ranker, Trender or Profiler results into an Excel file it is an easy process. IMPORTANT: Once you have downloaded the Excel file, to open it you must opern from the file NOT opening excel first and trying to open it. Just ...
If Radius will not allow you to install new Ratings data
If once you have downloaded the Ratings data, Radius will not let you open the file to install it, you will need to tell the computer how to open it. You will only need to do this once. Right click on the data file in your download folder or wherever ...
Return to the last thing you working on
There are 4 icons across the top of Radius that will take you back to the last Schedule, Ranker, trender or Profiler you were working on. NOTE: If you have multiple markets in Radius, be sure you are working in the correct market that the item you ...
How to create an annual schedule with multiple weeks without creating many flights
If want to create a schedule for an annual or covering several months but do not want to have to create lots of flights there is a solution. This solution only works though when you do not need to send an XML to an agency. This also assumes that it ...
Radius is stuck and not working
If Radius is frozen you can do the following. On your computer task bar at the bottom of your desktop look for the Radius icon (Circle with the number 32 on it). Right click it and click on close window. That should shut it down. So you can move to ...
Next page